This manual provides instructions on how to use GDS Smart-HTWO.
(※ If you are unable to download on your smartphone,
please download from the PC webpage ( https://support.gitauto.com/ ). )
Please select the function you require.
-------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------------------------------
: Explanation of the basic operation of GDS-Smart.
: Explanation of how to connect (pair) VCI II, GDS VCI, and TPMS modules.
: By using the Smart Search function, you can check information (basic information, repair history) about the selected vehicle and view technical information (by symptom, by case, etc.).
: Provides a function to check the operating status of the controller or vehicle parts before vehicle repair.
: Provides comprehensive diagnostic results for the selected vehicle's system.
: Explanation of the basic operation of the Tool Box.
: You can search for fault codes in one or more systems installed in the vehicle, and check detailed information and service information related to the detected fault codes.
: Provides comprehensive diagnostic results for the selected vehicle's system.
: This function allows you to check the parameter values controlled by various control modules installed in the vehicle for sensor signal input and actuator operation via vehicle communication.
Multiple Sensor Data Diagnosis
: Similar to Sensor Data Diagnosis, this function allows you to analyse each sensor item of multiple controllers installed in the vehicle on a single screen simultaneously.
*Works only for modules that support the CAN communication protocol.
: This function forcibly operates and stops various actuators installed in the vehicle via the control module, allowing you to check whether the parts are functioning normally.
: Provides functions such as additional settings, tests, and initialisation after vehicle repair.
: Displays the specification information (Part No, H/W, S/W, etc.) of the controllers installed in the vehicle.
: You can view data stored on the tablet PC and copy driving data stored on the VCI II.
: This function corrects and improves problems and performance of the vehicle's controllers as required by the manufacturer for specific issues. It can be carried out at facilities designated by the manufacturer.
: Used to display powertrain exhaust gas related diagnostic data according to the OBD-II standard.
: A function that records data output during vehicle operation.
: Provides a function to check the operating status of the controller or vehicle parts before vehicle repair.
: Various utilities are provided for user convenience.
: Allows you to check the inside of machinery that is difficult to visually inspect directly, using the wireless endoscope module.
*This is an optional item and must be purchased separately.