(※ Depending on your mobile environment settings, there may be issues downloading or opening user manual files. If you cannot open the user manual file, please install a different internet browser such as "Samsung Internet Browser" and then download the file, or download and check it from the PC webpage ( https://support.gitauto.com/).
Please refer to the video guide at the link below.
Please select the function you want.
--------------------------------------------------------------------------------------------------------------------
Basic Operation Smart Search Digital Field Fix Smart Diagnosis
Expert Diagnosis Fault Code Search Sensor Data Diagnosis Multi Sensor Data Diagnosis Forced Operation Additional Functions
Specification Information Saved Data Analysis ECU Upgrade OBD-II Driving Data Storage Utility
Wireless Endoscope ScopeTech--------------------------------------------------------------------------------------------------------------------
: This is a description of the basic operation of KDS 2.0.
: This explains how to connect (pair) the VCI II, GDS VCI, and TPMS modules.
: Using the Smart Search function, you can check information (basic information, repair history) of the selected vehicle and view technical information (by symptom, by case, etc.).
: Provides shortcuts to useful utilities.
: Provides a comprehensive diagnostic result for the systems
: This is a description of the basic operation of expert diagnosis.
Smart Diagnosis: Provides a comprehensive diagnostic result for the systems of the selected vehicle.
Sensor Data Diagnosis: This function allows you to check parameter values controlled by various control modules installed in the vehicle for sensor signal input and actuator operation via vehicle communication.
Multi Sensor Data Diagnosis: Similar to Sensor Data Diagnosis, this function allows you to analyse each sensor item of multiple controllers installed in the vehicle simultaneously on one screen.*Operates only on modules that support the CAN communication protocol
Forced Operation : This function forcibly operates and stops various actuators installed in the vehicle through the control module, allowing you to check whether the parts are operating normally.
Additional Functions : Provides additional settings, tests, initialisation, etc. after vehicle repair.
Specification Information : Displays specification information (Part No, H/W, S/W, etc.) of the controllers installed in the vehicle.
Saved Data Analysis : You can view data saved on the tablet PC and copy driving data saved on the VCI II.
ECU Upgrade : This function corrects and improves controller problems and performance for issues implemented by the vehicle manufacturer as needed. It can be carried out by companies designated by the manufacturer.
OBD-II : Used to display powertrain exhaust gas-related diagnostic data according to the OBD-II standard.
Driving Data Storage : This function records data output during vehicle operation.
Digital Field Fix : Provides a function to check the operating status of controllers or vehicle parts Utility : Various utilities are included for user convenience.
Wireless Endoscope : Allows you to check the inside of machinery that is difficult to see directly with the naked eye through the wireless endoscope module. *This is an optional item and must be purchased separately.
ScopeTech : This function diagnoses the vehicle by using the VMI measurement module to measure and simulate actual waveforms of sensors and actuators.